Anasayfa UBYS E-posta
METALURJİ VE MALZEME MÜHENDİSLİĞİ BÖLÜMÜ

Yayınlar ve Bildiriler

2026 Yılında Yayınlanan Makaleler
 

Emre Alan, Muharrem Gürgen, Barış Özlü, Süleyman Gündüz, Halil Demir. Effect of precipitate-controlled microstructures on machinability of continuously cooled low-carbon high-strength low-alloy steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, SAGE Publications, 2026.
1

Purlu, K. M., Dalgac, S., Isik, E., Kafkaslioglu Yildiz, B., Elmabruk, K. Strontium oxide-doped alumina-based functional ceramics: microstructure, dielelectric properties, and suitablility for 5G/6G and millimeter-wave applications, Journal of Materials Science: Materials in Electronics, 2026.
2

Işık, E., Taşkın, A., & Şenel, M. C. Synergistic effect of heat treatment and graphene/ZrO₂ addition on the mechanical and tribological properties of Al7075-based hybrid composites, Advanced Engineering Materials, 2026.
3

Purlu, K. M., Dalgac, S., Isik, E., Kafkaslioglu Yildiz, B., Elmabruk, K. Impact of pure α-Al2O3 powder sources and sintering temperature on the behaviour of Al2O3 ceramics in Terahertz band, Journal of the Australian Ceramic Society, 2026.
4

Varol, M., Karakan, M., Eray, S., Kilinc, E. Tailoring Mechanical and Tribological Properties of Al-Si/Al2O3 Composites Produced by Powder Metallurgy via In Situ Al2O3 Formation and Machine Learning Insights. Journal of Materials Engineering and Performance, 2026
5

Maidaula, A., Matin, A., Khan, M., Baig, N., Kalanthoden, A. N., & Younas, H. Dual-action comb-shaped amphiphilic polymers as novel cleaning agents for efficient cleaning of organic-fouled RO membranes. Results in Surfaces and Interfaces, 2026.

2025 Yılında Yayınlanan Makaleler
1

Kafkaslıoğlu Yıldız, B., Taşdemir, S., Işık, E. Assessing the Fracture Toughness of Al2O3-Sm2O3 Ceramics for Different Sm2O3 Contents Using a Reliable Toughness Measurement Method: Single-Edge Precracked Beam. Journal of Materials Engineering and Performance, 2024.
2

Purlu, K. M., Dalgac, S., Isik, E., Kafkaslioglu Yildiz, B., Elmabruk, K. Preparation and dielectric properties of Al2O3-based ceramic composites with Sm2O3 and ZrO2 additives for terahertz applications. Ceramic International, 2025.
3

Işik, E., Taşkin, A. & Şenel, M.C. Investigation of Mechanical and Tribological Properties of Al7075-Al2O3-GNPs Hybrid Composites Produced by Powder Metallurgy and Induction Hot Pressing. Journal of Materials Engineering and Performance, 2025.
4

Varol, M., Aygün, B., Karakan, M., Eray, S., Sayyed, M. I., Karabulut, A., & Kılınç, E. (2025). In situ fabrication and characterization of Al–Si/Al₂O₃ composites via powder metallurgy for neutron shielding applications. Nuclear Engineering and Technology, 58(4), 104058. https://doi.org/10.1016/j.net.2025.104058
2024 Yılında Yayınlanan Makaleler
1 Akgul, B., Kul, M., & Erden, F. The puzzling thermal expansion behavior of invar alloys: a review on process-structure-property relationship. Critical Reviews in Solid State and Materials Sciences, 49(2), 254–307. https://doi.org/10.1080/10408436.2023.2170975, 2024.
2 Kul, M., Akgul, B., Karabay, Y. Z., Pehlivanoglu, K., Turkyaman, B. A study of the effect of Ti-Al-V microalloying on the mechanical and physical properties of invar 36. Materials Today Communications, 109050, 2024.
3 Kul, M., Kurt, N., Yartasi, E., & Erden, F. Electrical and mechanical properties of reduced graphene oxide/CuCrZr composites. Canadian Metallurgical Quarterly, 63(3), 712–722. https://doi.org/10.1080/00084433.2023.2227481, 2024.
4 Kul, M., Akgül, B., Karabay, Y. Z., Hitzler, L., Sert, E., & Merkel, M.  Minimum and Stable Coefficient of Thermal Expansion by Three-Step Heat Treatment of Invar 36. Crystals, 14(12), 1097. https://doi.org/10.3390/cryst14121097, 2024.
5 Yildiz, B.K., Yildiz, A. S., Kul, M., Tur, Y.K., Isik, E., Duran, C., Yilmaz, H., Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries, Ceramics International, 2901-2908, 2024.
6

Kafkaslıoğlu Yıldız, B., Işık, E., Yıldız, A. S. Compressive Strength Analysis of Additively Manufactured Zirconia Honeycomb Sandwich Ceramic Parts with Different Cellular Structures. Black Sea Journal of Engineering and Science, 2024.
7 Kafkaslıoğlu Yıldız, B. Assessment of mechanical performance of Al2O3 ceramic honeycomb sandwich structures produced with SLA 3D-printing regarding unpolymerized slurry removal strategy. J Aust Ceram Soc 60, 1199–1208 (2024). https://doi.org/10.1007/s41779-024-01021-x
8 Usta, U., Kafkaslıoğlu Yıldız, B. & Dara, B.G. The effect of sintering temperature and low content of TiO2 on the microstructure and mechanical properties of ZTA-TiO2 composites. J Aust Ceram Soc 60, 35–45 (2024). https://doi.org/10.1007/s41779-023-00973-w
9

 Işik, E., Şenel, M.C., Taşkin, A. Investigation of Microstructures and Mechanical Properties of Al2024/6061/7075-Graphene Composites. Gazi University Journal of Science, 2024.
10 Orak, C., Oğuz, T., & Horoz, S. (2024). Facile synthesis of Mn-doped CdS nanoparticles on carbon quantum dots: towards efficient photocatalysis. Journal of the Australian Ceramic Society, 60, 1657-1667.
 2023 Yılında Yayınlanan Makaleler
1 K. Mirza, M. Aasim, R. Katırcı, M. Karataş, S. A. Ali, Machine Learning and Artificial Neural Networks-Based Approach to Model and Optimize Ethyl Methanesulfonate and Sodium Azide Induced In Vitro Regeneration and Morphogenic Traits of Water Hyssops (Bacopa monnieri L.), Journal of Plant Growth Regulation, 1-15, 2023.
2 A. Kasikci, R. Katirci, S. Ozdemir, M. S. Yalcin, M. Ozcesmeci, Glycerol group substituted bis (2-pyridylimino) isoindoline (BPI) complexes: synthesis, characterization and investigation of their biological properties, Dalton Transactions, 52, 9993-10004, 2023.
3 R. Katirci, K. I. Danaci, The optimization of nickel electroplating process parameters with artificial intelligence methods, Journal of Applied Electrochemistry, 1-13, 2023.
4 Y. Dogan, R. Katirci, I. Erdogan, E. Yartasi, Artificial neural network based optimization for Ag grated D-shaped optical fiber surface plasmon resonance refractive index sensor, 534, 129332, 2023.
5 B. K. Yildiz, Y. K. Tur, Analysis of reciprocating wear behaviour of Al2O3 ceramic composites prepared with nano-Ni, ZrO2, and Cr2O3 additives through heterogeneous precipitation, Jurnal Tribologi, 37, 29-41, 2023.
6 R. Katirci, B. K. Yildiz, Prediction of fracture behavior of Al2O3-Cr2O3 ceramics in different Cr2O3 ratios under flexure load using machine learning methods, Computational Materials Science, 228, 112362, 2023.
7 B. Akgul, M. Kul, F. Erden, The puzzling thermal expansion behavior of invar alloys: a review on process-structure-property relationship, Critical Reviews in Solid State and Materials Sciences, 1-54, 2023.
8 M. Kul, B. Akgul, Y. Z. Karabay, The relationship of hot and cold rolling processes with the structure and properties of invar 36, Materials Chemistry and Physics, 295, 127215, 2023.
9 M. Kul, N. Kurt, E. Yartasi, F. Erden, Electrical and mechanical properties of reduced graphene oxide/CuCrZr composites, Canadian Metallurgical Quarterly,1-11, 2023.
10 M. Kul, K. O. Oskay, M. Doğan, N. Aslan, Efficient Zinc Removal from Blast Furnace Sludge Using Choline Chloride–Malonic Acid: Towards Sustainable Recycling of Iron Extraction Waste, The Journal of The Minerals, Metals & Materials Society, 1-8, 2023.
2022 Yılında Yayınlanan Makaleler
1 I. Ozcesmeci, R. Katirci, B. S. Sesalan, The analysis of interactions between DNA and small molecules: proposal for binding mechanisms based on computational data, Monatshefte für Chemie – Chemical Monthly, 153, 113-124, 2022.
2 A. Kirtis, M. Aasim, R. Katirci, Application of artificial neural network and machine learning algorithms for modeling the in vitro regeneration of chickpea (Cicer arietinum L.), Plant Cell, Tissue and Organ Culture (PCTOC), 1-12, 2022.
3 M. Aasim, R. Katirci, O. Akgur, B. Yildirim, Z. Mustafa, M. A. Nadeem, F. S. Baloch, T. Karakoy, G. Yilmaz, Machine learning (ML) algorithms and artificial neural network for optimizing in vitro germination and growth indices of industrial hemp (Cannabis sativa L.), Industrial Crops and Products, 181, 114801, 2022.
4 A. Yesildag, M. Erdogan, H. Medetalibeyoglu, S. Horoz, Synthesis of benzidine-based conjugated organic materials bearing donor-acceptor groups: DFT studies and photovoltaic applications, Journal of Molecular Structure, 1251, 131939, 2022.
5 E. Batur, S. Kutluay, O. Baytar, O. Sahin, S. Horoz, Superior incident photon-to-current conversion efficiency of Mo-doped activated carbon supported CdS-sensitized solar cells, 2022.
6 A. Ekinci, O. Sahin, S. Horoz, Kinetics of catalytic hydrolysis of NaBH4 solution: Ni-La-B catalyst, Journal of the Australian Ceramic Society, 58, 113-121, 2022.
7 R. Katirci, H. M. Akgun, B. Tekin, O. G. Komurkaya, M. Zontul, O. Kaynar, Classification of Zinc-Coated Parts in Accordance with their Brightness Degree using Deep Learning Techniques, Journal of the Turkish Chemical Society Section B: Chemical Engineering, 5, 145-156, 2022.
8 R. Katirci, B. Tekin, The Optimization of The Zinc Electroplating Bath Using Machine Learning And Genetic Algorithms (NSGA-II), Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 11, 1050-1058, 2022.
9 M. Aasim, R. Katirci, F. S. Baloch, Z. Mustafa, A. Bakhsh, M. A. Nadeem, S. A. Ali, R. Hatipoglu, V. Ciftci, E. Habyarimana, T. Karakoy, Y. S. Chung, Innovation in the breeding of common bean through a combined approach of in vitro regeneration and machine learning algorithms, Frontiers in Genetics, 13, 897696, 2022.
10 M. Yakut, M.Yılmaz, T. Pekel, S. Erkan, R. Katirci, E. Bicer, Manganese (III) Acetate‐Based Radical Cyclization Reactions for Pyranocoumarin and Pyranoquinoline Compounds: Synthesis, DFT and Molecular Docking Studies, ChemistrySelect, 7, e202202787, 2022.
11 S. Gumrukcu, R. Katirci, M. Ozcesmeci, C. Ünlü, İ. Ozcesmeci, Energy transfer processes in 1, 3-bis (pyridyl) iminoisoindoline based donor–acceptor system–Synthesis, photophysics, and TD-DFT study, Inorganic Chemistry Communications, 146, 110215, 2022.
12 B. K. Yildiz, Y. K. Tur, Investigation of mechanical properties and stored elastic energy fragmentation of Al2O3-Cr2O3 ceramic system with increasing Cr2O3 content, Processing and Applications of Ceramics, 16, 351-357, 2022.


Yazar Adı/Adları Bildiri Başlığı Kongre / Sempozyum / Konferans Adı Ulusal / Uluslararası Bildiri Türü Etkinliğin Düzenlendiği Yer Bidiri Tarihi Sayfa Aralığı
E. Işık, M. C. Şenel Alümina Takviyeli Al7075 Esaslı Kompozitlerin Mikroyapısının ve
Mekanik Özelliklerinin İncelenmesi		 1st International Conference on
Innovative Academic Studies		 Uluslararası Sözlü Bildiri Konya, Türkiye 10.09.2022 - 13.09.2022 1060-1064
T. Oğuz, E. Işık, B. K. Yıldız, R. Katırcı Bor ve Fosfor Katkılı CZTS İnce Filmlerin Fotovoltaik Performansının In-Slico Yöntemleri ile İncelenmesi 3. International Hasankeyf Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Batman, Türkiye 17.12.2022 - 18.12.2022 232-238
B. K. Yıldız, A. S. Yıldız, E. Işık Effect of Fracture Type on Strength of 3d Printed Zro2 Rectangular Bars Produced with Sla Technique Sivas
II. International Conference on Scientific and
Innovation Research		 Uluslararası Sözlü Bildiri Sivas, Türkiye 15.09.2023 - 17.09.2023 1443-1451
S. Bozkurt, E. Işık, Y. K. Tür, B. K. Yıldız Farklı Oranlarda Samaryum Oksit Katkısının Alümina Seramiklerin Mekanik Özellikleri Üzerine Etkisi 9. Uluslararası Mühendislik Ve Teknoloji Yönetimi Kongresi Uluslararası Sözlü Bildiri İstanbul, Türkiye 29.04.2023 - 30.04.2023 747-754
B. K. Yıldız, E. Işık, T. Şanlı The Effect of Samarium Oxide and Magnesium Nitrate Additives on the Microstructure and Densification of Alumina Ceramics 7th International Aegean Conference on Innovation Technologies and Engineering Uluslararası Sözlü Bildiri İzmir, Türkiye 26.04.2023 - 27.04.2023 191-200
E. Işık, A. Taşkın, M. C. Şenel Comparison Of Mechanical Properties Of Al7075-Al2O3 And
Al7075-ZrO2 Composites		 ISARC 4. International Uludağ Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Bursa, Türkiye 16.11.2024 - 17.11.2024 226-233
B. K. Yıldız, A. S. Yıldız, E. Işık Evaluation of Compressive Strength Behavior of Al2O3 Honeycomb Sandwich Structures with Different Core Designs Produced by Sla 3D‐Printing 7. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi Uluslararası Sözlü Bildiri İstanbul, Türkiye 25.05.2024 - 26.05.2024 120-126
T. Şanlı, B. K. Yıldız, E. Işık, Y. K. Tür Evaluation of Fracture Toughness of Sm2O3 and ZrO2-Added Al2O3-based Sandwich Composite Structures ASES VIII. International Health, Engineering and Sciences Congress Uluslararası Sözlü Bildiri İzmir, Türkiye 06.04.2024 - 07.04.2024 156-166
T. Şanlı, B. K. Yıldız, E. Işık, Y. K. Tür Investigation of The Ballistic Performance of Al2O3-Sm2O3 Ceramics and Al2O3-Based ZrO2 and Sm2O3-Added Sandwich Samples 10. International European Congress on Advanced Studies in Basic Sciences Uluslararası Sözlü Bildiri Amsterdam, Hollanda 26.07.2024 - 28.07.2024 695-704
A. Taşkın, E. Işık, M. C. Şenel Si₃N₄ ve B₄C Takviyeli Al7075 Matrisli Kompozitlerin
Sürtünme ve Aşınma Davranışları		 1. International Avrasya Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Bakü, Azerbaycan 22.11.2024 - 24.11.2024 726-734
T. Şanlı, B. K. Yıldız, E. Işık, Y. K. Tür Sintering Strategy Of Al2O3 Based Composite Hexagonal
Ballistic Test Samples Prepared With Different Additives		 6. International Dicle Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Diyarbakır, Türkiye 25.05.2024 - 26.05.2024 397-405
B. K. Yıldız, E. Işık The Effect of Different Alumina Sources on the Microstructure of Al2O3-Sm2O3 Ceramics International Marmara Sciences Congress Uluslararası Sözlü Bildiri Kocaeli, Türkiye 31.05.2024 - 01.06.2024 209-214
K. M. Pürlü, E. Işık, B. K. Yıldız, K. Elmabruk Impact of Zro2 and Ni Additives on The Properties of Al2O3-Based Ceramics in the Terahertz Band Sivas International Conference on Scientific and Innovation Research - IV Uluslararası Sözlü Bildiri Sivas, Türkiye 30.05.2025 - 31.05.2025 754-762
R. Katırcı, T. Oğuz The Effect of The Use of Complexifiers On Chemical Composition in Cr-Ni Coatings Sivas International Conference on Scientific and Innovation Research - IV Uluslararası Sözlü Bildiri Sivas, Türkiye 30.05.2025 - 31.05.2025 991-998
R. Katırcı, T. Oğuz Effect of Alloying Elements on Quality in Chromium Alloy Coatings and Development of Chromium-Nickel Alloy 9. International Marmara Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri İstanbul, Türkiye 01.02.2025 - 02.02.2025 171-182
S. Horoz, T. Oğuz Nanoscale Triple Metal Oxide for Effective Dye Degradation Sivas II. International Conference on Scientific and Innovation Research Uluslararası Sözlü Bildiri Sivas, Türkiye 15.09.2023 - 17.09.2023 498-503
S. Horoz, T. Oğuz The Efficiency and Potential of Ternary Catalysts in NaBH4 Hydrolysis Sivas II. International Conference on Scientific and Innovation Research Uluslararası Sözlü Bildiri Sivas, Türkiye 15.09.2023 - 17.09.2023 492-497
T. Oğuz, R. Katırcı The Effect of Bath Parameters on Nickel Ratio of Zn-Ni Plates Coated with Electrolytic Method 3. International Mediterranean Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Antalya, Türkiye 26.08.2023 - 27.08.2023 230-241
T. Oğuz, R. Katırcı The Effect of Organic Additives on The Brightness of Zinc Coating 3. International Mediterranean Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Antalya, Türkiye 26.08.2023 - 27.08.2023 243-252
T. Oğuz, R. Katırcı Investigation of The Effect of Cr, Cu, Zn, and Fe Impurities on Brightness, Thickness and Distribution of Nickel Coating 5. International Marmara Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Ankara, Türkiye 17.06.2023 - 18.06.2023 680-690
T. Oğuz, R. Katırcı Effects of Electrolytic Bronze Plating Parameters on Plating Color and Distribution 5. International Marmara Scientific Research and Innovation Congress Uluslararası Sözlü Bildiri Ankara, Türkiye 17.06.2023 - 18.06.2023 691-701
T. Oğuz, R. Katırcı Investigation of The Effect of Organic Additives on Zinc Coating Thickness and Distribution 6. International Sciences and Innovation Congress Uluslararası Sözlü Bildiri Ankara, Türkiye 25.02.2023 - 26.02.2023 66-76
E. K. Yılmaz, T. Oğuz, K. Adem A CNN-Based Hybrid Approach to Classification of Raisin Grains 1st International Conference on Frontiers in Academic Research Uluslararası Sözlü Bildiri Konya, Türkiye 18.02.2023 - 21.02.2023 460-467
E. Alan Sustainable Production of High-Strength Steels Through Optimized Continuous Cooling Strategies The 6th International Academic Researches for Sustainability Uluslararası Sözlü Bildiri İstanbul, Türkiye 46010 151-155
E. Alan, M. Gürgen Sustainability-Oriented Evaluation of the Effects of Sulfur Contents on Microstructure, Mechanical Properties and Machinability of Hot-Rolled C45 Steel The 10th International Halich Congress on Multidisciplinary Scientific Research Uluslararası Sözlü Bildiri İstanbul, Türkiye 46147 1327 - 1328
S. Eray Metal-Polimer Birleştirme İçin Eklemeli İmalat Yoluyla Yüzey Yapılandırması 2. BİLSEL International Sütçü İmam Scientific Research Congress Uluslararası Sözlü Bildiri Kahramanmaraş, Türkiye 04.04.2026 - 05.04.2026