Yayınlar



Demircioğlu, U., Bakır, H., & Çakır, M. T. (2024). Machine learning analysis of data obtained by finite element method: a new approach in structural design. Physica Scripta, 99(3), 036004. (SCI-Exp)
Aktemur, C., Çakır, M. T., & Çakır, M. F. (2024). Optimising of thermal insulation thickness based on wall orientations and solar radiation using heating-degree hour method. Case Studies in Thermal Engineering, 104725. (SCI-Exp)
Yildiz, M. T., & Babacan, N. (2024). Comparison of tensile properties and porcelain bond strength in metal frameworks fabricated by selective laser melting using three different Co-Cr alloy powders. The Journal of Prosthetic Dentistry, 131(5), 936-942. (SCI-Exp)
Caliskan, M., Hafizoglu, H., & Babacan, N. (2024). Dynamic mechanical properties of selective laser-melted AlSi10Mg lattice structures: experimental and numerical analysis with emphasis on Johnson-Cook model parameters. The International Journal of Advanced Manufacturing Technology, 132(7), 3861-3875. (SCI-Exp)
Seremet, H., & Babacan, N. (2024). Compressive properties of AlSi10Mg lattice structures with novel BCCZZ and FCCZZ configurations fabricated by selective laser melting. Rapid Prototyping Journal, 30(4), 770-781. (SCI-Exp)
Yıldız, B. K., Yıldız, A. S., Kul, M., Tür, Y. K., Işık, E., Duran, C., & Yılmaz, H. (2024). Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries. Ceramics International, 50(2), 2901-2908. (SCI-Exp)
Kavasoğulları, B., Karagöz, M. E., Önel, M. N., Yildiz, A. S., & Biçer, E. (2024). Enhancing the performance of the hybrid battery thermal management system with different fin structures at extreme discharge conditions. Numerical Heat Transfer, Part A: Applications, 1-23. (SCI-Exp)
Ettahır El Hadı, O. S., Sözen, A., Rezaeızadeh, R., Hançerlioğulları, A., Aytaç, İ., Variyenli, H. İ., & Çakır, M. T. (2024). Improving Thermal and Electricity Generation Performance of Photovoltaic/Thermal (PV/T) Systems Using Hybrid Nanofluid. Heat Transfer Research, 55(8). (SCI-Exp)
Demircioğlu, U., & Bakır, H. (2024). Artificial intelligence-based position control: reinforcement learning approach in spring mass damper systems. Physica Scripta, 99(4), 046003. (SCI-Exp)
Demircioğlu, U., Bakır, H., & Çakır, M. T. (2024). Machine learning analysis of data obtained by finite element method: a new approach in structural design. Physica Scripta, 99(3), 036004. (SCI-Exp)
Demircioğlu, U., Sayil, A., & Bakır, H. (2024). Detecting cutout shape and predicting its location in sandwich structures using free vibration analysis and tuned machine-learning algorithms. Arabian Journal for Science and Engineering, 49(2), 1611-1624. (SCI-Exp)
Demircioğlu, U., & Çakır, M. T. (2024). A comparison study of passive, active, and semi-active suspension systems. International Journal of Vehicle Noise and Vibration, 20(2), 107-118. (SCI-Exp)
Demircioğlu, U., & Çakır, M. T. (2024). Investigation of the Influence of Debonding Shapes and Debonding Locations on Vibration Behavior of Sandwich Structure. Composites Theory and Practice, 24. (SCI-Exp)
Yıldız, A. S., & Eker, S. B. (2024). Semi-active control implementation in aircraft landing gear systems using hardware-in-the-loop test bench. Engineering Research Express, 6(3), 035529. (E-SCI)
Demircioğlu, U., & Çakır, M. T. (2024). A comparison study of passive, active, and semi-active suspension systems. International Journal of Vehicle Noise and Vibration, 20(2), 107-118. (E-SCI)
Demircioğlu, U., & Çakır, M. T. (2024). Investigation of the Influence of Debonding Shapes and Debonding Locations on Vibration Behavior of Sandwich Structure. Composites Theory and Practice, 24. (E-SCI)
Bai, Y., Gong, Q., Zhou, X., Babacan, N., & Guan, S. (2024). Low-cycle fatigue testing and microstructure of high strength-ductility structural steel materials. Low-carbon Materials and Green Construction, 2(1), 1.
Demircioglu, U., Eker, S. B., & Yıldız, A. S. (2024). Active Vibration Control of Landing Gear System. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 12(3), 1692-1701.
Yıldız, B. K., Işık, E., & Yıldız, A. S. Compressive Strength Analysis of Additively Manufactured Zirconia Honeycomb Sandwich Ceramic Parts with Different Cellular Structures. Black Sea Journal of Engineering and Science, 7(5), 939-945.
Kilic, A. S., Hafizoglu, H., & Babacan, N. (2025). Investigation of ballistic performance of selective laser-melted AlSi10Mg alloy lattice structures by experimental and numerical studies. Materials Today Communications, 44, 112032.
Aktürk, D., Yildiz, M. T., Yurtkuran, E., & Babacan, N. (2025). Microstructural and fatigue properties of dental structures produced via selective laser melting: comparing Co-Cr-Mo, Co-Cr-Mo-W and Co-Cr-W alloys. Rapid Prototyping Journal, 31(6), 1280-1290.
Babacan, N., Yildiz, M. T., Ozdemir, F., Atilgan, A., Seremet, H., & Ozdemir, R. (2025). The effect of interlayer time on the microstructure and mechanical properties of a Co-Cr alloy produced by laser powder bed fusion. Journal of Alloys and Compounds, 1036, 181661.
Tunçil, İ., & Çakır, M. T. (2025). Analysis and optimization of film cooling parameters for turbine blades using CFD. Applied Thermal Engineering, 275, 126850.
Kavasoğulları, B., Karagöz, M. E., Önel, M. N., Yildiz, A. S., & Biçer, E. (2025). Enhancing the performance of the hybrid battery thermal management system with different fin structures at extreme discharge conditions. Numerical Heat Transfer, Part A: Applications, 86(24), 9007-9029.
Aktemur, C., Çakır, M. T., & Çakır, M. F. (2024). Optimising of thermal insulation thickness based on wall orientations and solar radiation using heating-degree hour method. Case Studies in Thermal Engineering, 60, 104725.
Gürgenç, E., Öztop, H. F., Şenocak, Ş. M., Aktemur, C., Gürgenç, T., Varol, Y., ... & Gür, M. (2025). Hafnium carbide as a novel nanofiller for RT64HC phase change materials: Enhancing thermal conductivity, heat capacity, and cycling stability. Thermal Science and Engineering Progress, 104257.
KARAGÖZ, M. E., Aktemur, C., & KAVASOĞULLARI, B. (2025). Numerical performance analysis of latent heat thermal energy storage systems in different configurations cascaded in the longitudinal direction. Case Studies in Thermal Engineering, 106686.
Yildiz, Y. A., Gucyetmez, M., & Aktemur, C. (2025). 3E analysis of a wind-solar-biomass energy generation in context of regional multi-microgrids: A case study of Sivas, Turkiye. Renewable Energy, 246.
Torun, E., Buyruk, E., & Caner, M. (2025). Examination of the cooling performance of the lithium-ion battery module created using phase change material at different discharge rates and different ambient temperatures. The European Physical Journal Plus, 140(1), 46.
Torun, E., & Buyruk, E. (2025). Modeling the discharge process in lithium-ion batteries with two different numerical models and comparison with experimental data. Journal of Thermal Analysis and Calorimetry, 1-15.
Selimoğlu, Ö., Yılmaz, Ü., & Kılıçaslan, M. F. (2025). Experimental evaluation of tilted secondary mirror-based forward motion compensation in high-resolution earth observation systems. Optics Communications, 132512.
Demircioğlu, U., & Bakır, H. (2025). Reinforcement learning–driven proportional–integral–derivative controller tuning for mass–spring systems: Stability, performance, and hyperparameter analysis. Engineering Applications of Artificial Intelligence, 162, 112692.
Demircioglu, U., Bakir, H., & Cakir, M. T. (2025). Compensation of Cutout Effect on Natural Frequencies of Beam Structure Using Deep Learning: A Novel Multi-Disciplinary Approach. International Journal of Information Technology & Decision Making.
Aktürk, D., & Yurtkuran, E. (2025). Comparative Analysis of the Properties of ASTM F75 Alloy Powders Atomized with Argon and Nitrogen: Numerical and Experimental Insights. Powder Metallurgy and Metal Ceramics, 1-17.
Karahasan, B., Dogan, D. O., & Babacan, N. (2025). Investigation of Metal-Ceramic Bond Strength in Co-Cr Alloys Produced by Selective Laser Melting at Different Laser Powers. The International Journal of Prosthodontics, 1-19.
Aktürk, D., Yildiz, M. T., & Babacan, N. (2025). COMPARATIVE ANALYSIS OF BCCZZ LATTICE STRUCTURE COMPRESSION BEHAVIOR: EXPERIMENTAL, NUMERICAL, AND MACHINE LEARNING APPROACHES. International Journal of 3D Printing Technologies and Digital Industry, 9(1), 36-44.
Caliskan, U., & Toker, G. P. (2025). Numerical Investigation of the High Strain Rate Behavior of Superelastic NiTi Alloys. Enginoscope, 1(2), 165-177.
Torun, E., & Buyruk, E. (2025). Effect of Different Heat Pipe Lengths on Heat Transfer in Battery Cooling Systems. International Journal of Engineering Research and Development, 17(1), 115-125.